Belt Breaking Detector
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Breaking detector installation and application:
Step 1:Insert one side of belt into No.1 test knife slot which showed in diagram 1
according to mode of diagram 5,No.1 test knife clip in diagram 1 connects with
pressure plate No.2 by using screw No.5 in diagram 1, tighten screw to ensure
gapless between No.1 and No 2.
Step 2: Insert another side of same belt into No.1 short circuit knife clip slot showed in
diagram No.2 according to mode of diagram 6, No.1 test knife clip in diagram 2
connect with pressure plate No 2 by using screw No.3 in diagram 2,tighten screw to
ensure gapless between No.1 and No 2.
Step 3: Test whether testing pin A is switched on testing pin B by multimeter.
Step 4: Repeat step 1, step 2 and step 3 to install other traction belt. Please pay
attention to the test knife clip should be installed in the same side near to control
cabinet and short knife clip should be in other side. Clip point from traction belt buckle
distance should be > 200 mm.
Step 5: Testing component No.3 in diagram 1 connect with adjacent testing component
No. 4 sequentially, fore and aft ends is tested with a multimeter (terminal A and
terminal B) to check whether through
Step 6: Connection mode of terminal A and terminal B is according to diagram 3 or
diagram 4.
Step 7: According to diagram 4 terminal code with testing box and wiring instruction,
terminal 1 and terminal 2 connect AC220V, terminal 5?terminal 6 connect with
terminal A and B in diagram 7.Terminal 3 and terminal 4 connect with safety circuit in
control cabinet.
- Belt machine deflector pulley 1 Pieces / (Min. Order)
- Belt Clip 1 Pieces / (Min. Order)
- Contitech Belt 1 Pieces / (Min. Order)
- FAXI86 Series Belt Traction Machine 1 Pieces / (Min. Order)
- Rope Fastening Ø6 Ø6.5 Ø8 1 Pieces / (Min. Order)
- FAXI150 Series Gearless Traction Machine 1 Pieces / (Min. Order)
- FAXI100S Series Belt Traction Machine 1 Pieces / (Min. Order)
- Belt machine deflector pulley 1 Pieces / (Min. Order)
- Belt Clip 1 Pieces / (Min. Order)
- Contitech Belt 1 Pieces / (Min. Order)
- FAXI200XB/230XB/240XB/320XB Series 15 Pieces / (Min. Order)
- FAXI240L Series Gearless Traction Machine 15 Pieces / (Min. Order)
- FAXI320 Series Gearless Traction Machine 15 Pieces / (Min. Order)
- FAXI400 Series Gearless Traction Machine 15 Pieces / (Min. Order)
- FXW1 Series Gearless Traction Machine 15 Pieces / (Min. Order)
- FXW2 Series Gearless Traction Machine 15 Pieces / (Min. Order)